How to Install Xentry 2019 on VXDIAG Benz C6: A Comprehensive Guide

The ALLSCANNER VXDIAG Benz C6 Star C6 is a powerful diagnostic tool favored by automotive professionals for Mercedes-Benz vehicles. To unlock its full potential and ensure compatibility with the latest diagnostic software, such as Xentry 2019, updating your device’s firmware and drivers is crucial. This guide provides a detailed, step-by-step walkthrough on how to Install Xentry 2019 compatibility on your VXDIAG Benz C6, ensuring seamless operation and access to advanced diagnostic features.

Before you begin the process to install Xentry 2019, ensure you have the following prerequisites in place:

• VXDIAG Benz C6 Diagnostic Tool: Make sure you have your VXDIAG Benz C6 interface device ready.
• Stable Internet Connection: A reliable internet connection is required for downloading updates and drivers.
• Windows PC: You will need a Windows-based computer to perform the firmware and driver updates.
• VX Manager Software: Ensure you have the latest VX Manager software installed on your PC. This software is essential for managing and updating your VXDIAG device. You can download it from the official VXDIAG website or the provided software disc.
• Xentry 2019 Software: Have your Xentry 2019 diagnostic software package ready for installation after the firmware update.

Once you have confirmed these prerequisites, you can proceed with the firmware update process to install Xentry 2019 compatibility.

Updating VXDIAG Benz C6 Firmware for Xentry 2019

The first crucial step to install Xentry 2019 compatibility is updating the firmware of your VXDIAG Benz C6 device. Follow these steps carefully:

1. Open VX Manager: Launch the VX Manager software on your computer. Ensure your VXDIAG Benz C6 device is connected to your computer via USB.

2. Navigate to “Firmware Update”: In the VX Manager interface, locate and click on the “Firmware Update” tab. This section is dedicated to updating the device’s core firmware.

3. Update VCX Plus Firmware: Click the “Firmware Update” button within the “Firmware Update” section. This will initiate the update process for the VCX Plus firmware to version 1.5.2.0 or the latest available version, which is necessary to install Xentry 2019 support. Wait for the firmware update to complete. Do not disconnect the device during this process.

4. Update DoIP Firmware: After the VCX Plus firmware update is finished, proceed to update the DoIP firmware.

   1. Select “DoIP Update”.
   2. Click “Download firmware” to ensure you have the latest DoIP firmware version.
   3. Press “Update” to start the DoIP firmware update process.
   4. Wait until you see a “Finish” message confirming the successful DoIP firmware update. This update is vital for Xentry 2019 compatibility and enhanced communication protocols.

5. Install BENZ C6 New Driver: To finalize the firmware update and ensure seamless operation with Xentry 2019, you need to install the latest BENZ C6 driver, version 3.0.8.306 or a newer compatible version provided by VXDIAG. This driver ensures proper communication between your PC, the VXDIAG interface, and the Xentry 2019 software. Follow the prompts in VX Manager to install the driver.

Configuring VXDIAG Benz C6 VCI for Xentry 2019

After successfully updating the firmware and drivers, the next step to fully install Xentry 2019 support is to configure the VXDIAG Benz C6 Vehicle Communication Interface (VCI). Follow these configuration steps:

1. Open ConfigAssist: Locate and open the “ConfigAssist” tool, which is usually included in the VX Manager software suite.

2. Choose X-ENTRY Diagnosis VCI: In ConfigAssist, select the option for “X-ENTRY Diagnosis VCI”. This specifies that you are configuring the VCI for use with Mercedes-Benz Xentry diagnostic software.

3. Press Configure: Click the “Configure” button to initiate the VCI configuration process.

4. Continue Configuration: Follow the on-screen prompts by pressing “Continue” to proceed through the configuration steps.

5. Enter StartKey Manually: If the system is unable to automatically detect the StartKey, you will be prompted to enter it manually. Select “Manually enter StartKey”.

6. Input and Save StartKey: Manually enter your StartKey and click “Save” to store it. This StartKey is essential for authenticating your VXDIAG device with the diagnostic software.

7. Confirm StartKey Saved: Ensure you receive a confirmation message indicating that the StartKey has been successfully saved.

8. Couple VCI (Connect VCI): Select “Couple VCI” or “Connect VCI” to finalize the configuration and establish a connection between the VCI and the software.

9. Configuration Complete: Once the configuration is done, you will receive a “Configuration is done” message.

10. Restart Computer: Restart your computer to ensure all configuration changes are properly implemented.

After restarting, you should see the C6 Benz icon and VCI number displayed, indicating a successful connection and configuration, ready for Xentry 2019.

Utilizing VXDIAG C6 Benz VCIRecovery for Different Xentry Versions

The updated firmware for VXDIAG Benz C6 includes a VCIRecovery function. This feature is particularly useful if you need to switch between different versions of Xentry software, such as using older versions pre-2018 alongside the newly installed Xentry 2019. VCIRecovery allows you to exchange configurations to support different software versions.

1. Run VCIRecovery: Locate and run the “VCIRecovery” application on your desktop. Navigate to the installation directory, typically found at C:ProgramDataVCXAppsBENZC6.

2. Select VCI Version: In the VCIRecovery tool, select the appropriate VCI version compatible with the Xentry software version you intend to use. For Xentry 2019, ensure you select the corresponding version.

3. Update Firmware via VCIRecovery: Press “Update” in the VCIRecovery tool to apply the selected VCI version’s firmware. Wait for the update to complete successfully. This process ensures your VXDIAG Benz C6 is correctly configured for the specific Xentry version you want to operate.

By following these comprehensive steps, you can successfully install Xentry 2019 compatibility on your VXDIAG Benz C6, ensuring you can leverage the latest diagnostic capabilities for Mercedes-Benz vehicles. Remember to always keep your VXDIAG software and firmware updated to maintain optimal performance and compatibility with the evolving diagnostic software landscape.