Mercedes-Benz Xentry is a comprehensive diagnostic software used by technicians and automotive professionals to diagnose and repair Mercedes-Benz vehicles. Installing Xentry can seem daunting, but with a step-by-step approach, the process becomes manageable. This guide provides a detailed walkthrough on How To Install Mercedes Xentry on your Windows 10 system, ensuring you have the necessary tools to maintain and repair your Mercedes-Benz.
Important Notes Before You Begin:
- Disable Secure Boot: Before starting the installation, access your computer’s BIOS settings and disable the Secure Boot option. This is crucial for Windows 10 systems to allow the installation of Xentry.
- Windows 10 Compatibility: The latest versions of Xentry are designed to run on Windows 10. Compatibility with older operating systems like Windows 7 is not guaranteed.
Step-by-Step Installation Process
The installation process is demonstrated using images from a previous version, but the steps remain consistent for newer versions of Xentry.
Step 1: Initiate the Installation
Locate the installation folder, typically named “XDS_[version number]”. Inside this folder, find the “start” application file. Double-click “start” to begin the Xentry installation process.
Step 2: Select Installation Language
A prompt will appear asking you to select the language for the installation. Choose your preferred language from the available options to proceed with the installation in your chosen language.
Step 3: InstallShield Wizard Preparation
XENTRY Diagnostic OpenShell requires certain prerequisites to be installed on your computer. Click “Install” to allow the InstallShield Wizard to install these necessary components. This step ensures your system is ready for the Xentry software.
Step 4: Welcome to InstallShield Wizard
The InstallShield Wizard for XENTRY Diagnostic OpenShell will launch. Click “Next” to continue with the setup process.
Step 5: Accept License Agreement
Read the license agreement carefully. To proceed, you must accept the terms and conditions. Select “I accept the terms in the license agreement” and then click “Next”.
Step 6: Choose Destination Location
The installer will suggest a default installation location for Xentry. It is recommended to install Xentry in the default location. Click “Next” to continue with the default destination folder.
Step 7: Ready to Install Program
The setup is now ready to begin installing XENTRY Diagnostic OpenShell. Click “Next” to start the installation process.
Step 8: Installation Progress
The InstallShield Wizard will now install XENTRY Diagnostic OpenShell on your computer. This process may take a considerable amount of time, potentially more than 2 hours, depending on your computer’s performance. Allow the installation to complete without interruption.
Step 9: Completing the Installation
Wait until the installation progress bar indicates completion. Do not cancel or shut down your computer during this phase.
Step 10: Restart Your Computer
Once all modules are installed, the wizard will prompt you to restart your computer. Follow the prompt and restart your PC to finalize the installation process.
Step 11: Close ConfigAssist
After your computer restarts, ConfigAssist may run automatically. Close ConfigAssist as it is not needed at this stage of the installation.
Step 12: ConnectorAPI Integration
Navigate to the “ConnectorAPI” folder within your installation files. Copy the “ConnectorAPI64.dll” file to C:WindowsSystem32. Then, double-click the “64.reg” file and click “OK” to add it to the system registry.
Step 13: XentryAPI Integration
Open the “SysWOW64” folder from your installation files. Copy the “XentryAPI.dll” file and paste it into C:WindowsSysWOW64. Next, double-click “old key loader for configassist or startkeycenter 64bit.reg” and click “OK” to merge it into the registry.
Step 14: Run XDOS Black List
Execute “XDOS black list.exe” and click “Extract”. This step is important for system configuration.
Step 15: Copy Baureihen Pictures
Copy the images from the “Baureihen” folder to C:Program Files (x86)Mercedes-BenzXentryKontexteProduktuebersichtBilderBaureihen. This adds vehicle model series images to your Xentry installation.
Step 16: Configure Xentry Folder
Go to C:ProgramDataMercedes-Benzconfig and create a new folder named “Xentry”. Then navigate to C:ProgramDataMercedes-BenzconfigXD_MB and copy “GlobalUserSettings.properties” to the newly created C:ProgramDataMercedes-BenzconfigXentry folder.
Step 17: Activate Xentry
Run ConfigAssist to proceed with activation. You will need your Hardware ID, which you should send to [email protected] for activation key generation (This is a paid service). Alternatively, if you have purchased XENTRY KeyGen, you can activate it yourself.
Click “Manual” in ConfigAssist, input your StartKey code, and click “Save”. A message will confirm “StartKey installed successfully.”
Step 18: Modify XentryServices.xml (For versions prior to 12.2023 – Skip for 12.2023 and later)
(Note: For Xentry version 12.2023 and newer, this step can be skipped.)
For older versions:
- Navigate to
C:Program Files (x86)Mercedes-BenzXentryXD_MBbinand cut the “XentryServices.xml” file to your desktop. - Open the file with Notepad.
- Locate a specific line (details of the line to delete should be provided in your specific installation instructions, if applicable) and delete it.
- Save the modified “XentryServices.xml” and cut it back to
C:Program Files (x86)Mercedes-BenzXentryXD_MBbin.
Repeat this process for C:Program Files (x86)Mercedes-BenzXentryXD_DTbin if instructed in your specific guide.
Step 19: Backup and Shortcut Creation
Copy “Backup.bat” from the downloaded files to C: and double-click to run it. This will generate a “lic_key_2.dat” file (do not delete this file).
Copy “start_Xentry.bat” to C:Program Files (x86)Mercedes-BenzXentryXD_MB. Right-click on “start_Xentry.bat”, send to “Desktop (create shortcut)”.
Always use this “start_Xentry” shortcut on your desktop to launch Mercedes Xentry instead of other methods.
Step 20: Exit Xentry
To properly exit Xentry, double-click the “Diagnosis Stop” icon on your desktop.
Congratulations! You have now successfully installed and activated Mercedes Xentry Diagnostic software.
Troubleshooting SmartKey Issues
If you encounter a “SmartKey invalid” error, ensure that you have disabled the “Secure boot” option in your BIOS settings. This is a common cause of SmartKey validation problems.
This comprehensive guide should help you through the process of installing Mercedes Xentry. For further assistance or to acquire the necessary software, please visit xentryportal.store.
